Knowledge Base
Product Questions · Swallowtail Airbrushes
See All
Product Questions
How do I adjust the spray setting on the Swallowtail for finer lines?
Switch to the 0.28mm needle, lower your PSI to around 15, and use the round air cap for maximum control.
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
Are there any customization options for these collaborations?
Aside from the specific colorways, you can customize performance by swapping between the included mirror-level gravity cups (1/3 oz and 2/3 oz) and using different air caps (Fan vs Round).
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
Can I change the needle/nozzle size for different effects? Can I change the needle/nozzle size for different effects?
Yes. Both the Barbatos Rex and Studio G versions are designed for a 3x Needle System, supporting 0.28mm, 0.5mm, and 0.7mm setups out of the box.
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
Which accessories and parts are compatible with these Swallowtail models?
They are compatible with official Gaahleri side-feed gravity cups (1/10 oz to 1 oz) and standard 1/8" BSP air hoses.
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
What can I do if the trigger on my Swallowtail feels stiff or unresponsive?
The extended trigger can feel different. If it’s stiff, check the spring tension and ensure no paint has dried in the trigger pivot area.
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
Why does my swallowtail airbrush have inconsistent spraying or overspray?
Check your air pressure stability and thinning ratio. Gravity side-feeds are sensitive to paint viscosity; if it's too thick, the flow will be erratic.
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
Are there any unique maintenance steps for these Swallowtail versions?
Yes. You must clean the gravity side-feed attachment port and the mirror-level cups thoroughly to prevent paint from curing in the connection joints.
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
What should I do if Swallowtail air comes out but no paint?
Ensure the needle is moving when you pull the trigger. If it is, the side-feed port or the nozzle is completely blocked.
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
Why does Swallowtail airbrush pattern look distorted?
Inspect the needle tip. A microscopic bend or "hook" on the 0.28mm needle will ruin your spray pattern immediately.
Aug 14, 2026 • Swallowtail Airbrushes
Product Questions
Why does Swallowtail paint stop spraying mid-session?
Likely a partial clog or an air pocket in the gravity side port. Perform a quick reverse-flow clean to clear the obstruction.
Aug 14, 2026 • Swallowtail Airbrushes