Knowledge Base

Product Questions

How do I adjust the spray setting on the Swallowtail for finer lines? 

Switch to the 0.28mm needle, lower your PSI to around 15, and use the round air cap for maximum control.

Aug 14, 2026 • Swallowtail Airbrushes

Product Questions

What upgrades or enhancements are available for the Mobius 0.3mm? 

You can customize trigger spring tension through the rear cutaway window, or fit the 0.2 mm needle, nozzle and nozzle‑cap set to achieve ultra‑fine‑detail painting.

Aug 14, 2026 • Mobius Airbrushes

Product Questions

Which accessories and parts are compatible with the Mobius 0.3mm? 

It is compatible with official Gaahleri Mobius-series replacement components (needles, nozzles, cups) and standard 1/8" BSP air hoses.

Aug 14, 2026 • Mobius Airbrushes

Product Questions

How do I adjust the spray setting on the Mobius 0.3mm for finer lines? 

For finer lines, start at the lower end of the recommended pressure range, around 15–25 PSI, and use a light, controlled trigger pull to reduce paint flow. Work closer to the surface while keeping your hand movement steady. Properly thinned paint and a clean needle and nozzle will also help improve fine-line control.

Aug 14, 2026 • Mobius Airbrushes

Product Questions

What can I do if the main lever of the Mobius 0.3mm sticks?

Inspect the spring tension through the rear cutaway handle window. If the spring sleeve tension is set incorrectly or debris is trapped in the sleeve, return action will feel sluggish.

Aug 14, 2026 • Mobius Airbrushes

Product Questions

Why does my Mobius 0.3mm spray unevenly or with overspray? 

Uneven spraying or overspray with the Mobius 0.3mm is usually related to  excessive air pressure, improper airflow adjustment, paint condition, paint buildup on the needle or nozzle, or spraying distance . For fine detail work, we recommend starting at  15–25 PSI , while  25–40 PSI  can be used as a reference for broader coverage. Adjust the precision air control knob gradually based on paint viscosity and paint flow. Dried paint on the needle tip, a partially clogged nozzle, or paint that is too thick or poorly mixed can also cause unstable atomization and an uneven spray pattern. Spraying from too far away or using too much paint can further increase overspray. We recommend first checking the working pressure, airflow adjustment, needle and nozzle cleanliness, and paint viscosity, then fine-tuning the spraying distance and paint flow as needed.

Aug 14, 2026 • Mobius Airbrushes

Product Questions

Are there any unique maintenance steps for the Mobius 0.3mm airbrush? 

Yes. During deep cleaning, take extra care with the needle and nozzle components. After removing the air cap, nozzle cap, and nozzle, carefully remove the needle through the front of the airbrush. This helps prevent the needle tip from hitting internal components and reduces the chance of dragging paint residue into the trigger mechanism. Never force the needle during removal or reassembly. The Functional Cutaway Design can also be used to inspect and adjust trigger spring tension when needed.

Aug 14, 2026 • Mobius Airbrushes

Product Questions

What should I do if Mobius 0.3mm air comes out but no paint? 

First, make sure the needle moves backward when you pull the trigger. If the needle is moving normally but no paint comes out, check the 0.3mm nozzle for a blockage. Clean the nozzle carefully and make sure the paint passage is free of dried paint or residue before testing again.

Aug 14, 2026 • Mobius Airbrushes

Product Questions

Why does Mobius 0.3mm airbrush pattern look distorted? 

Check the 0.3mm needle tip for a bend, hook, or other damage. Even a very small deformation can cause the spray pattern to become lopsided or distorted. If the needle appears damaged, replace it before continuing to spray. It is also a good idea to check the nozzle for dried paint or visible damage.

Aug 14, 2026 • Mobius Airbrushes

Product Questions

Why does Mobius 0.3mm paint stop spraying mid-session? 

Paint stopping mid-session is usually caused by tip dry or a partial clog in the nozzle or paint passage. Check the needle tip for dried paint and clean it with a brush and a cleaner or thinner compatible with your paint. If the problem continues, perform a quick reverse-flow flush to help clear paint residue from the internal fluid path.

Aug 14, 2026 • Mobius Airbrushes

Video

Solve Airbrush Spraying Issues

Aug 14, 2026 • Airbrushes

Tutorials • Video

How to assemble and disassemble Mobius SP?

Aug 15, 2026 • Mobius Airbrushes

Tutorials • Article

How To Clean The Mobius SP?

Aug 15, 2026 • Mobius Airbrushes

Tutorials • Video

How to assemble and disassemble Mobius TG?

Aug 15, 2026 • Mobius Airbrushes

Tutorials • Article

How to assemble and disassemble the Aventus?

Aug 15, 2026 • Aventus Airbrushes

Tutorials • Video

How to clean the Aventus?

Aug 15, 2026 • Aventus Airbrushes

Tutorials • Article

Introduction to Seeker

0.3 & 0.5mm

Aug 15, 2026 • Seeker Airbrushes

Tutorials • Video

Introduction to GHAD-39

0.35mm & 0.5mm

Aug 15, 2026 • Seeker Airbrushes

Tutorials • Article

Introduction to Swallowtail

0.28mm, 0.5mm, 0.7mm

Aug 15, 2026 • Swallowtail Airbrushes

Tutorials • Video

Introduction to Swallowtail SD

0.28mm & 0.5mm

Aug 15, 2026 • Swallowtail Airbrushes

Tutorials • Article

Introduction to Mobius TG 0.5mm

Aug 14, 2026 • Mobius Airbrushes

Article

Mobius 0.3mm Airbrush Complete Overview and Guide

Explore the Gaahleri Mobius 0.3mm airbrush. Features fine-detail control, top gravity feed, ergonomic trigger handling, and setup maintenance tips.

Aug 19, 2026 • Mobius Airbrushes

Article

Airbrush Cleaning Basics：Why It Matters, Tools, Steps & Tips

Learn airbrush cleaning basics to prevent clogs and extend tool life. Essential tools, step-by-step flushing, and maintenance tips included.

Aug 19, 2026 • Airbrushes

Article

Airbrushing Tips: “No‑Cap” Painting And Interchangeable Parts You Should Know

Master "no-cap" airbrushing for precision work and learn how interchangeable nozzles and needles boost versatility across Gaahleri models.

Aug 19, 2026 • Airbrushes